Products
Wholesale Complete 50kW Deye Inverter & 86KWh-200KWh LiFePO4 Battery Set
products formPRODUCTS
| hot selling in Industrial & Commercial Energy Storage 86KWH/100KWH/200KWH with 50kW Inverters | |||
| Model | X-86KWH-50KW | X-100KWH-50KW | X-200KWH-50KW |
| System Specification | |||
| Nominal Output Power | 50KW | ||
| AC Output Frequency and Voltage | 50/60Hz; 3L/N/PE 220/380, 230/400Vac | ||
| Grid Type | Three Phase | ||
| AC Output Rated Current | 75.8A | ||
| System Energy | 57.33KWH | 100.35KWH | 200.48KWH |
| Battery Chemistry | LiFePo4 | ||
| Battery System Nominal Voltage | 204.8Vdc | 358.4Vdc | 716.8Vdc |
| Battery Operating Voltage | 179.2Vdc-230.4Vdc | 313.6-403.2Vdc | 627.2-806.4Vdc |
| Max. charging/discharging efficiency | 140A | ||
| Dimension (W x D x H,mm) | 804*2180*1104mm | 1626*1245*2175mm | |
| Installation Site | Outdoor | ||
| Communication port | CAN | ||
| Air conditioner, Firefighting aerosol | Included | ||
| Integrated Lighting, Smoke detector | Included | ||
| IP Rating of Enclosure | IP55 | ||
| Operation Temperature Range | -30℃ ～ +50℃ | ||
| Operation Humidity Range | 0~95%(NO Condensing) | ||
| Altitude | ≤3000m | ||
| PV Input Data | |||
| Max. DC Input Power | 65KW | ||
| Max. DC Input Voltage | 1000VDC | ||
| MPPT Range | 450-850VDC | ||
| PV Input Current | 36A+36A+36A+36A | ||
| No.of MPP Trackers | 4 | ||
| No.of Strings per MPP Tracker | 2 | ||
| AC Specification(ON GRID) | |||
| Rated AC Power | 50KW | ||
| Rated AC Output Voltage& Frequency | 400Vac, 50/60HZ | ||
| Grid Type | Three Phase | ||
| AC Output Rated Current | 72.5A | ||
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging | ||
| Total Harmonic Distortion (THD) | <3% (of nominal power) | ||
| AC Specificaton(OFF GRID) | |||
| Rated AC Power | 50KW | ||
| Rated AC Output Voltage& Frequency | 400Vac, 50/60HZ | ||
| Grid Type | Three Phase | ||
| Peak Power (Off Grid) | 1.5 time of rated power, 10S | ||
| Total Harmonic Distortion (THD) | <3% (of nominal power) | ||
| Battery Module Specification | |||
| Nominal Voltage | 51.2V | ||
| Nominal Energy | 14.33KWH | ||
| Max. charging/discharging efficiency | 140A | ||
| Dimension | 418*770*235mm | ||
| Weight | 110kg | ||
products DESCRIPTIONPRODUCTS
Core Capabilities
*Battery Voltage Range: 160-800 V Li-ion/LiFePO₄ battery support.
*Battery Input: Two battery input ports, each with \~50 A max charging / discharging (≈ 100 A total).
*PV input / MPPTs: 2-4 MPPTs depending on model; each MPPT supporting e.g. 36 A input currents.
*Grid & Load Handling: Supports on-grid, off-grid, UPS modes; accepts AC coupling, also diesel generator backup.
*Parallelism / Scalability: Up to 10 inverters parallel-operated; multiple battery units in parallel.
*Programmable Control: Multiple (6) programmable time slots for battery charge/discharge; configurable prioritization (grid vs battery vs generator)
*Environmental & Safety Ratings: P65; wide ambient temperature range (-40 to +60°C, derating above certain temps); protections - overcurrent, overvoltage, arc-fault optional etc.
Benefits for a Customer:
* High voltage battery compatibility → smaller battery current, less conductor size & losses.
* Multiple MPPTs allow better solar harvesting even when strings have different orientations or partial shading.
* UPS-type switching ensures backup during grid outages.
* Scalability via parallel inverters and batteries allows both mid-sized and large installations.
* Time-of-use / peak / off-peak scheduling helps lower electricity cost.
Battery: LiFePO₄ Battery Pack ~ 86-200 kWh
When matched with a 50 kW inverter, battery of this size is appropriate for many commercial, industrial, or large off-grid/backup/self-consumption + peak shaving” systems. Key features you’d want:
Technical and Performance Features:
Operational & Application Features:
* Peak shaving (reducing demand charges by discharging during peaks).
* Backup power during outages (UPS / off-grid).
* Load shifting (charge during cheap off-peak electricity, discharge during expensive hours).
* Renewable self-consumption (store solar excess for later use).
* Hybrid setups (with grid + solar + generator) for reliability.
---
Combined System: Inverter + Battery Set
Putting the inverter and battery together, the system would have characteristics like:
*Total usable energy storage somewhere between ~86-200 kWh, supporting the 50 kW inverter injecting into loads (or feeding back to grid) for few hours depending on utilization.
*Fast response** backup capability, since inverter supports UPS mode and switching between grid/battery/generator.
*Scalability**: both battery bank and inverter can be expanded in parallel.
