Hybrid Inverter
Megarevo 80v High Voltage 8kw 10kw 12kw Split Phase Solar Inverter
products formPRODUCTS
| Megarevo 80v high voltage 8kw 10kw 12kw split phase solar inverter | ||||
| Model | AL-R6KH1NA | AL-R8KH1NA | AL-R10KH1NA | AL-R12KH1NA |
| Input (PV) | ||||
| Max. Power(kW) | 7.8 | 10.4 | 13 | 15.6 |
| Max. DC Voltage(V) | 500 | |||
| MPPT Voltage Range(V) | 125 - 500 | |||
| Max.Input Current Of Single MPPT(A) | 12 | |||
| MPPT Tracker/Strings | 4/1 | |||
| AC Output | ||||
| Rated Output Power(kVA) | 6 | 8 | 10 | 12 |
| Max. Output Current(A) | 27.3 | 36.4 | 45.4 | 50 |
| Grid Voltage/Range(V) | 240/211~264 | |||
| Frequency (Hz) | 50/60 | |||
| PF | 0.8lagging-0.8leading | |||
| THDi | < 3% | |||
| AC Output Topology | L+N+PE | |||
| Battery | ||||
| Battery Voltage Range(V) | 85~400 | |||
| Max. Charging Voltage(V) | 400 | |||
| Full Battery Voltage(V) | 85 | 110 | 140 | 160 |
| Max. Charge/Discharge Current(A) | 80/80 | |||
| Battery Type | lithium /Lead-acid | |||
| Communication Interface | CAN,RS485 | |||
| EPS Output | ||||
| Rated Power(kVA) | 6 | 8 | 10 | 12 |
| Rated Output Voltage(V) | 220-240 /110-120 | |||
| Rated Frequency(Hz) | 50/60 | |||
| Automatic Switching Time(ms) | <20 | |||
| THDu | < 2% | |||
| Overload Capacity | 110%,30S/120%,10S/150%,0.02S | |||
products DESCRIPTIONPRODUCTS
Megarevo 80v high voltage 8kw 10kw 12kw split phase solar inverter Feature:
Flexible
The model covers 7.6kw -11.4KW, with unifed appearance
design.
Wide battery input range, compatible with a variety of lithium
batteries and lead-acid.
Grace
Fashionable appearance, convenient wiring.
IP65 design, natural cooling, extermal fan free design, low noise ,
improve the whole machine life.
Reliable
Battery reverse connect protection, the charge and discharge
are contolled by inelligent software to improve the battery life.
Input and output lightning protection, PV arcing detection.
Discharge at full power and disconnect the charger automati-
cally when the battery is ful.
Off grid full power output, transient 1.5 times overload, soft
start mode, with air conditioning, water pump and other loads.
Insulation detection, leakage battery, ground fault detection,
island protection to prevent electric shock.
Advanced
Maximum efficiency up to 98.2%.
4 independent MPPT design, making full use of light energy in
different directions.
Distributed vitual power station management node.
Remote monitoring of computers and mobile phones
WHY HYBRID INVERTERS?
Why we choose hybrid inverter? In residential, I belive hybrid inverter will instead of grid tied inverter in near future.
Let's see the reasons:
A single machine can become the core of your PV+ energy storage system.
So it brings below benefits,
1. No need to install an on grid inverter
2. No need to install an off grid inverter
3. No need to install solar charge controller
4. No need to install AC coupled controller
5. Save the equipment cost
6. Save the installation cost
7. Save the communication cost
8. Save the O&M cost
9. Save the installation space
10. Save the troubleshooting cost
11. Reduce the equipment failure rate
12. Reduce the after sales service cost
13. Increase the proportion of photovoltaic power generation for self-use
14. Monitor real time generation and consumption
So this kind of inverter, is not a complicated or difficult equipment, it's an easy and multiple function inverter.The integrated technology benefits make it easier to install, maintain, and smarter. When you decide to install a photovoltaic system in your home, make it a priority, because you can install batteries when you need them. It is the core equipment of PV + energy storage system. Users can easily feel that there is no trouble of power failure, no high electricity bill, and even we can enjoy the subsidy of feed in grid in some areas.
