Off Grid Inverter
10KW Split Phase Solar Power Inverter 110v/220Vac
products formPRODUCTS
| Split Phase Solar Power Inverter Specification | |
| AC Input | |
| Nominal Power | 1/2/3/4/5/6/8/10/12KW |
| Input Volltage Waveform | sinusoidal(utility or generator) |
| Nominal input Voltage | HOT1-HOT2: 240VAC |
| _ow Line Disconnect | 180Vac+4%(Normal) or 140Vac+4%(Wide) |
| Low Line Re-connect | 190V ac+4%(Normal) or 150V ac+4%(Wide) |
| High Line Disconnect | 270V ac+4%(Normal) or 270V ac+4%(Wide) |
| High Line Re connect | 260Vac+4%(Normal) or 260Vac+4%(Wide) |
| Max AC input Voltage | Max280V |
| Frequency | 50Hz:41-54Hz, 60Hz:51-64Hz |
| AC Output | |
| Output Voltage Waveform | Sinewave |
| Power Factor | US$11.00 |
| Nominal Output Voltage (V) |
HOT1-N: 120Vac +10%rms; HOT2-N: 120Vac土10%rms; HO1-HOT2: 240Vac +10%rms |
| output phase difference | HOT1-N and HOT2-N is 180°; HOT1-N and HOT1-HOT2is 0°; HOT2-N and HOT1-HOT2 is 180° |
| Nominal OutputFrequency (Hz) | 50Hz土1Hz, 60Hz土1Hz |
| AC Charger | |
| Nominal Charger Current | 20A/35A/50A/70A/90A(According to the inverter model)adjustable 5 stages charging current; |
| Over charge Protection | Bat.V≥15.5VDC for 12V battery、Bat.V ≥31.0VDC for 24V battery、Bat.V ≥62.0VDC for 48V battery; beeps 0.5s every 1s & fault after 60s |
| Solar Charger | |
| Rated Charge Current | 40A/60A/120A optional |
| PV Input Voltage range | 15VDC-40VDC for 12VDC, 30VDC-75VDC for 24VDC, 60-145VDC for 48V |
| Max.PV open circuit array Voltage | 12V for 40Vdc, 24V for 75Vdc, 48V for 145Vdc |
| Charger mode | MPPT |
| PV Low Voltage Re-connect | PV≌Bat.V |
| Eficiency | ≥97% |
| Battery Voltage | |
| Nominal DC input Voltage | 12/24/48v |
| Low Battery Alarm | 10.5VDC+0.3VDC for 12VDC/21VDC+0.6VDC for 24VDC/42VDC+1.2VDC for 48VDC |
| Low DC input Shut & Down |
10VDC+0.3VDC for 12VDC/20VDC+0.6VDC for 24VDC/40VDC+1.2VDC for 48VDC |
| High DC input Alarm & Fault |
16VDC+0.3VDC for 12VDC/32VDC+0.6VDC for 24VDC/64VDC+1.2VDC for 48VDC |
| Efficiency | |
| Efficiency(Battery Mode) | ≥87% |
| Efficiency (Line Mode) | > 98% |
| Transfer Time | |
| ACtO DC | 20ms(max) |
| DC to AC | 15ms(max) |
| System Parameter | |
| Over-Load Protection | 110% < load< 150%，beeps 0.5s every 1s, and Fault after 60s off |
| Output Short Circuit | the output, load> 150%, beeps 0.5s every 1s, and Fault after 20s |
| Protection | YES |
| Surge Rating | 1:3(VA) |
| Protections | Low battery, over charging, over load, over temp |
| Indicators | LED+LCD Display |
| General Specification | |
| Operating Temperature | 0°C~40C |
| Range | 15C~ 60°C |
| Storage Temperature | 5% to 95%(non-condensing) |
| Operation humidity | 60dB max |
| Audible Noise | 80dB max |
| cooling | Forced air,variable speed fan |
| Dimension(L .*W*H) | 480*336*190mm/530*400*190mm/627*416*204mm |
| Net Weight(kg) | 24kg/27kg/30.6kg/42kg/46.5kg/48.5kg/64kg73kg/79kg |
products DESCRIPTIONPRODUCTS
-
X-10000 Split Phase Inverter Specification◆AC/Solar charging Off grid Hybrid Inverter.◆LED/LCD display, Enhanced functions settingvia LCD, Man-machine intelligent design.◆Built-in 40A/60A optional MPPT solar charger controller.◆LCD shows the solar capacity.◆Adjustable 5 stagesAC charging current. ACcharging also can be closed.◆AC/DC priority modes can be set.◆Generator restart signal. (Dry contact).◆3 times peak power. Strong loading capacity. .◆Overload, output short-circuit protection.◆Apply to Split Phase system,2 live lines 1 neutral line,voltage is 120/240V.SPLIT PHASE INVERTER DESCRIPTIONWith reliable intelligent design, solar inverter can be available to complicated appliances. Not only used for common appliances such as TVcomputer, lights, fans.but also suitable for inductive loadings such as refrigerators, airconditioners, motors, pumps compressors and laser printers.
